[DAQ-CARD] ACL-7120
조회 : 1,167 | 12-10-24 12:36
관리자

  • 32 TTL digital input channels
  • 32 TTL digital output channels
  • High output drive and low input loading
  • 4 independent programmable 16-bit down counters
  • Crystal based frequency source
  • Clock frequency: 2MHz, 1MHz, 500kHz, or 250kHz, jumper selectable
  • Frequency divider: divided by 1, 10, 100, or user adjustable
  • Breadboard area for customized circuit
  • Internal/external interrupt generation
  • Registers compatible to PCL-720
 
 
제품설명
ACL-7120 is a digital I/O and count-er card for PC/AT and compatibles. It has a little of everything on-board,
including TTL compatible 32 digital inputs, 32 digital outputs, and 3 or 6 channels with a 16 bit counter/timer.
The breadboard area is provided for user circuit designs. All these features make the ACL-7120 a powerful
"Swiss Army Knife" of Digital I/O cards.
 
 
 
제품사양
 
Digital Output
  • Number of channels: 32 channels
  • Signal level: TTL compatible
  • Logic output level:
    • Low: -0.5V min to +0.8 max @ 24mA (sink)
    • High: 2.4V min to 5.0V max @ 0.8mA (source)
  • Output status can be readback
 
Digital Input
  • Number of channels: 32 channels
  • Signal level: TTL compatible
  • Logic low: Min. -0.5V Max. 0.8V
  • Logic high: Min. 2.0V Max 5.0V
 
Counter/Timer
  • Chip: 8253 or equivalent
  • Frequency of base clock: 4MHz
  • Number of counters: 3
  • Counter usage:
    • Counter 0 ~ Counter 2 are flexible for users
    • Counter 3 is used for 16-bit event counting interrupt source
    • Counter 4~5 are cascaded together for 32-bit timer pacer generation.
 
Bread Board Area
  • Pitch: standard 100 mils
  • Two strips of holes for power signals (+5V,GND)
 
General Specifications
  • I/O connectors: Five 20-pin header connectors
  • Operating temperature: 0줩 ~ 60줩C
  • Storage temperature: -20줩 ~ 80줩C
  • Humidity: 5~95%,non-condensing
  • Power consumption:
    • +5V @420mA typical
      500mA maximum
  • Dimensions: 194 mm x 114 mm