[DAQ-CARD] ACL-7130
Á¶È¸ : 3,627 | 12-10-24 12:51
°ü¸®ÀÚ

  • 32-CH digital inputs (16 isolated and 16 TTL inputs)
  • 32-CH digital outputs (16 isolated and 16 TTL outputs)
  • 2,500 Vrms high voltage isolation
  • High output driving capability with 500mA peak sink current
  • Wide range input voltage
  • Up to 24V voltage protection for non-polarity isolated input
  • On-board internal timer pacer trigger
  • Interrupt is controlled by internal timer or external signal
  • Dual interrupt trigger sources
  • One 37-pin D-type connector and two 20 pin header connectors
  • Register downward compatible to PCL-730
 
 
Á¦Ç°¼³¸í
 
The ACL-7130 provides 32 isolated digital I/O and 32 TTL digital I/O channels. The isolated I/O channels are
isolated to 2,500 Vrms (excluding cables). It protects your computer against damage caused by accidental
contact with high external voltage and eliminates troublesome ground loops.
Multiple interrupt sources can be selected by hardware jumper settings. Users can generate XT interrupt level
(3, 4, 5, 6, 7) from CH0 and CH1 of both isolated or TTL digital inputs, or AT Interrupt level (9, 10, 11, 12, 15) from internal timer pacer.
 
 
Á¦Ç°¼³¸í
 
 
Isolated Digital I/O
  • Optical Isolated Input Channel
    • Number of channels: 16
    • Voltage: 5~24Vdc or -5~-24Vdc
    • Input resistance: 1.2K?@0.5W
    • Isolation voltage: 2,500 Vrms
    • Throughput: 10 KHz
  • Optical Isolated Output Channel
    • Number of channels: 16
    • Output device: TD62003
    • Open collector 5 to 40Vdc (needs external power supply)
    • Sink current: 500mA max.
    • Isolation voltage: 2500 Vrms
    • Throughput: 10 kHz
 
TTL Digital I/O
  • Channel: 16 DI and 16 DO TTL compatible inputs and outputs
 
Programmable Counter
  • Device: 8254
  • A/D pacer: 32-bit timer (two 16-bit counters cascaded together) with a 2 MHz time base
  • Counter: One 16-bit counter with a 2 MHz time base
  • Pacer output: 0.00046Hz~0.5MHz
 
General Specifications
  • vI/O base address: 8 consecutive address locations
  • Connector: One DB-37 connector
  • Operating temperature: 0줩 ~ 60줩C
  • Storage temperature: -20줩 ~ 80줩C
  • Humidity: 5~95%, non-condensing
  • Power consumption: +5V@ 360 mA typ, 450 mA max
  • Dimensions: 163 mm x 123 mm