16 relay actuator outputs
16 opto-isolated AC or DC polarity-free digital inputs
LEDs indicate the energized relays
Input jumpers select AC Filter/ Non-AC Filter modes
1,000 VDC isolation
On-board relay driving circuits
On-board digital input signal conditioning circuits
37-pin D-type female connector
제품사양
Relay Outputs
- Relay type: Single-Pole-Double-Throw (SPDT)
- Output channels: 16
- Form C: CH# 0~4 and 8~12
- Form A: CH# 5~7 and 13~15
- Form C contacts: with Normal Open and Normal Closed
- Form A contacts: Normal Open only
- LED indicates each relay's ON/OFF status for monitoring.
- Contact type: 120VAC @ 0.5A or 24VDC @ 1A
- Contact resistance: Bifurcated
- Relay ON/OFF time: 5 msec. typical
- Coil voltage: +12V @ 33mA for each rela
- Isolated Inputs
The 16 photo-isolated DI channels are used for sensing digital inputs and provide 1,000VDC isolation. Each can be configured with AC Filter or Non-AC Filter by jumper settings.
- Number of input channels: 16
- Photo isolators: PC-814
- Input signal type: AC or DC
- AC: don't care polarity
- DC: with polarity
- Input voltage: 5~24VDC or AC 50~1,000Hz
- Input filters: RC low pass filter
- Input impedance: 1.2k Ohm
- Isolation voltage: 1,000VDC channel-to-channel and channel-to-ground
- Response time:
- 20 sec without AC Filter
- 2.2ms with AC Filter
General Specifications
- Operating temperature: 0줩 ~ 55줩C
- Storage temperature: -20줩 ~ 80줩C
- Humidity: 5~90%, non-condensing
- Power consumption:
- +5VDC: 310mA typical
- +12VDC: 550 mA maximum, all relays are energized
- Dimensions: 177 mm x 122 mm
|
