- 8 single-ended 12-bit analog input channels
- Software programmable input range: +5V, +2.5V, +1.25V, +0.625V, and +0.3125V
- Up to 30 kHz sampling rates with on-chip sample & hold
- One 12 bit monolithic multiplying analog output channel
- 16 TTL compatible digital outputs
- 16 TTL compatible digital inputs
- 3 Programmable A/D trigger modes
- One board 8254 timer chip
- Programmable IRQ level for A/D data transfer
- Compact size with rugged 37-pin D-type connector
제품사양
Analog Input (A/D)
- ADC and resolution: 12 bit ADS574 or equivalent
- Number of channels: 8 single-ended channels
- Maximum sampling rate: 30 kHz
- Input signal range: +5V, +2.5V, +1.25V, +0.625V, +0.3125V software programmable
- Over-voltage protection: + 35V maximum
- Input impedance: > 10M?
- Trigger mode: Software, on-board programmable timer or external trigger
- Data transfer: Program control, interrupt control
- IRQ level: Programmable IRQ 2, 3, 4, 5, 6, 7
- External trigger: TTL compatible digital trigger
Analog Output (D/A)
- DAC resolution: 12-bit, 7541A industry standard
- Conversion type: monolithic multiplying
- Number of channel: 1
- Voltage output range : 0~5V or 0~10V
- Reference voltage: -5V or -10V
- Setting time: 30 즗 sec
- Output drive: +5mA max.
Digital Input & Output (DIO)
- Number of channels: 16 DI channels and 16 DO channels
- I/O characteristics: TTL compatible
Programmable Counter
- Device: 82C54
- A/D pacer timer: 32 bit with 2MHz time base
General Specifications
- I/O base address: 16 consecutive address location
- I/O connectors: one DB-37 female connector and two 20-pin flat cable connectors
- Operating temperature: 0줩 ~ 55줩C
- Storage temperature: -20줩 ~ 80줩C
- Humidity: 5~95%, non-condensing
- Power consumption:
- +5V @ 440mA typical, 500mA max.
- +12V @ 60mA typical, 75mA max.
- Dimensions: 158 mm x 108 mm
|
