[DAQ-CARD] ACL-8316_8312
조회 : 1,695 | 12-10-24 12:56
관리자

  • 16-bit high analog input resolution with 1k word on-board FIFO
  • Auto-scanning channel selection
  • 100 kHz sampling rates
  • 16 SE or 8 DI analog input channels
  • Bipolar input signals and programmable gain
  • Optional two 12 bit unipolar or bipolar
  • 16 digital input / output channels
  • 3 independent 16-bit down counters
  • Programmable 3 A/D trigger modes and 4 interrupt sources
  • 16-bit AT Bus supports 9 interrupt levels and 16 bit DMA data transferring
  • Compact size and rugged 37-pin D-type connector
     
     
     
    제품사양
     
     
    Analog Input (A/D)
    • ADC and resolution:
      • ADS7804 or equivalent (12 bits for ACL-8312)
      • ADS7805 or equivalent (16 bits for ACL-8316)
    • Number of channels: 16 single-ended or 8 differential input
    • Conversion time: 8 µ sec
    • Maximum sampling rate: 100 kHz max. multiplexing
    • Input signal range:Bipolar: +10V, +5V, +2.5V, +1.25V
    • On board memory: 1k word FIFO
    • Data format: Two's complement
    • A/D trigger sources: 3 trigger sources: Includes software trigger, pacer trigger and external trigger
    • Data transfer mode: Software polling, EOC Interrupt transfer, FIFO polling, FIFO Half-full interrupt, and DMA transfer
     
    Analog Output (D/A)
    • DAC: B.B. DAC2813 or equivalent
    • DA resolution: 12 bits
    • Number of channels: 2 channels
    • Voltage output range: (jumper selectable) Bipolar: +10V or Unipolar: 0~10V
    • Settling time: 4.5 즗 sec typical
    • Output driving capacity: +5 mA
    • Data format: Two's complement or binary code
     
    Digital Input & Output (DIO)
    • Number of channels: 16 DI channels and 16 DO channels
    • I/O characteristics: TTL compatible
     
    Programmable Counter
    • Device: 82C54
    • A/D pacer timer: 32 bits with 2MHz time base
    • Counter: One 16 bits down counter
     
    Interrupt source:
    • 4 interrupt sources including timer pacer, EOC, external source, and FIFO half-full interrupt
     
    General Specifications
    • IRQ levels: 3, 5, 6, 7, 9, 10, 11, 12, 15
    • DMA level: 5, 6, 7 (16 bit DMA)
    • Operation temperature: 0줩 ~ 55줩C
    • Storage temperature: -20줩 ~ 80줩C
    • Humidity: 5~95%, non-condensing
    • Power consumption
      • +5V @ 400 mA typical
      • +12V@ 260 mA typical
    • Dimensions: 163 mm x 123 mm

  •